Power Protection Is An Integral Part Of Your Home Theater System
The total listening and visual experience created by today's home entertainment system is dependent on the sophistication of the audio/video components and a clean, safe source of pure power. Power should be invisible to the eye and ear. Unfortunately, the power feeding your audio and video equipment can be contaminated by a myriad of appliances in your home and neighborhood. In addition, cable, satellite, network and telephone lines running parallel to AC power wiring anywhere in the roof, attic, or walls can pick-up noise that degrades performance. For over three decades, Panamax has provided state of the art line conditioning to enhance the enjoyment of your home entertainment system and to protect your equipment against the effects of electrical noise, surges, spikes and even lightning. No one does it better or more completely.
Professional-Grade Power Protection
Using the Max 7500-PRO, any noise generated by digital source components is isolated and prevented from reaching key audio or video components. The Max 7500-PRO's ground isolation feature mechanically interrupts ground loops, making it especially useful for applications with unstable power or ground issues. IP addressable, the Max 7500-PRO is also ideal for multi-zone audio/video whole-home automation and wherever remote diagnostics are needed. For even more convenience, RS-232 communication comes standard with the 7500-PRO and a TCP/IP card is optional.
Protect Your Investments
If you think your brand-new home theater components can take care of themselves, you're wrong. Today's components are more power-hungry than ever, yet their delicate electronic constitutions don't handle surges or interference well. That's where Panamax comes in to play. The Power Cleaning and Filtration system on the Max 7500-PRO protects your components from damaging surges and eliminates common symptoms of contaminated power (including loss of detail and visual artifacts), allowing your home theater components to perform at their best.
Bank On Panamax For Serious Protection
Panamax keeps signals clean by putting their technology between the source of distortion (the power outlet) and the destination (your valuable component). The Max 7500-PRO provides a whooping five noise-isolated outlet banks. Filter-regulated Outlet Banks 1 and 2 provide four Balanced Double L filtered outlets for low current analog audio components such as pre-amplifiers, receivers, VCR's and tape decks. Isolated Outlet Banks 3 and 4 have four outlets which provide complete isolation for digital source components such as DVD players or display devices like plasma TVs or DLP projectors. These outlets are completely isolated from the rest of the system. Outlet High-current Bank 5 has two delayed outlets designed for high-current components such as amplifiers and powered subwoofers. The current available to connected equipment is not limited by the noise filtration components.
To Delay Or Not To Delay—The Choice Is Yours
The 7500-PRO has optional delay switches for all Outlet Banks. The Switched Outlets Delay two-position slide switches let you configure each bank for delayed on/off or always-on operation.
It's In The Circuitry
Panamax's AVM Circuitry continuously monitors the incoming line voltage and disconnects your equipment in the event of an over voltage or under voltage (brownout). Voltage can be visually monitored via the illuminated voltmeter. Power to the connected equipment is automatically turned off if either of these conditions is detected. When voltage returns to a safe level, power to the equipment is automatically reconnected.
Take A Load Off
Along with Panamax's standard 15-Amp circuit breaker, they've included a 720VA Isolation Transformer Circuit Breaker on the 7500-PRO. The Isolation Transformer Circuit Breaker automatically opens when the combined current load for Outlet Banks 3 and 4 is greater than 6 Amps.
Jack Of All Trades
The Panamax Max 7500-PRO has all of your connection needs covered. The two HD Satellite TV Coax Jacks have their bidirectional protection circuit optimized for satellite TV signal lines. The two HD Cable TV Coax Jack have their bidirectional protection circuit optimized for cable TV, off-air antennas and cable modem signal lines. The 1-In, 1-Out LAN Jacks have protection circuits configured for 10/100 baseT Ethernet lines, and the 1-In, 2-Out Phone Jacks have protection circuits configured for standard telephone or pay-per-view lines.
