Sonance SONAMP 1230 (Black)

12-channel black 360W power amplifier

530999908

Power up to 12 audio channels at 30W each with the SONAMP 1230 powered amplifier. Independent channel inputs allow you to match multiple sources with multiple zones. For home theater applications that require more power, channel bridging allows you to combine two outputs for a total of 60W of output power. Gold plating on all line inputs and five-way binding posts delivers high-conductivity and low-corrosiveness for clear, detailed, high-performance audio reproduction.

Black

12 channels, 360W . . . all at your disposal

You've finally created a true "home audio system". You don't just have a home theater system, you've got in-ceiling and in-wall speakers installed all over the place — hallways, walk-in closets, bathrooms, the kitchen — allowing you to enjoy all your favorite music, no matter where you are. How to power all those speakers, though? The Sonance SONAMP 1230 power amplifier sports 360W of output power for its 12 channels, for 30W-per-channel of power. Combine this with a variety of configuration options, and you have a versatile power solution for light distributed-audio applications.

Setup options for your system

The combination of the SONAMP 1230's twelve direct input source jacks, three bus line-in jacks, and channel-bridging ability offers you a versatile array of system configuration options. Power up to six stereo zones at 30W and send independent or shared source audio to each. Bridge five pair of 30W outputs to power a 5-channel home theater system with 60W per channel, and still have two 30W channels left over for a second zone in another room. From here, your options are endless. Bridge channels when you need to send extra power to a particular zone. Share source input across multiple zones to enjoy the same audio as you move about the house. You're in charge of customizing the SONAMP 1230's performance to your needs.

Three ways to power on

With its power trigger controls, the SONAMP 1230 gives you three options for automatically activating the unit. Select the Auto-On feature, and you can set the SONAMP 1230 to automatically power on when it senses a set minimum signal level, or to power off after eight minutes of no input signal. Choose voltage control, and the SONAMP 1230 is activated in the presence of DC or AC voltage from 5V to 20V. Finally, by choosing the bypass setting, you set the unit to always be active, ready to fuel your home audio experience.

Going for gold

Ensuring high-conductivity and low-corrosiveness for high-performance, enduring audio reproduction, the Sonance SONAMP 1230 uses gold plating on its line inputs and five-way binding posts.

Keeping the volume in balance

Adding yet another level of control over your home audio experience, the SONAMP 1230 offers individual channel volume controls. With these controls, you can balance desired sound levels for all your various zones, and compensate for room characteristics such as size and ceiling height by balancing output from right and left channels. Further, by reducing the SONAMP volume control settings, you can compel the source preamp or receiver volume control to operate in the middle of its range. In the end, you have advanced control over your system's volume levels.

Included with purchase

The following item is included with the purchase of the Sonance SONAMP 1230: one 14-gauge EIA standard 120V grounded power cable.

Comparison Specifications

Output power: 30W x 12 channels @ 8 ohms / 45W x 12 channels @ 4 ohms / 60W x 6 channels @ 8 ohms, bridged
Dynamic output power: 49W x 12 channels @ 8ohms / 78W x 12 channels @ 4ohms / 158W x 6 channels @ 8ohms, bridged
Input impedance: 20k ohms
Inputs: 3 bus line-in jacks (left, right, auxiliary) / 12 direct-input-source jacks (gold plated)
Outputs: 3 line-out jacks (left, right, auxiliary)
Speaker terminals: 12 isolated 5-way binding post terminals (gold plated)
Level adjustment: 12 input level controls
Auto On/Off: Auto On sensitivity control

Additional Specifications

6 bridging switches
12 source-selection switches
Trigger select switch
Control voltage input
Control voltage output
Ground lift

Manufacturer Specifications

Dynamic headroom: +2.13dB, 12 channels @ 8ohms / +2.38dB, 12 channels @ 4ohms / +4.15dB, 6 channels @ 8ohms bridged
Total harmonic distortion: 0.1% 20Hz - 20kHz @ 8ohms (30 WRMS) / 0.25% 20Hz - 20kHz @ 4ohms (45 WRMS) / THD @ 1kHz less than 0.01% with 8homs (30 WRMS) / THD @ 1kHz less than 0.01% with 4ohms, 45 WRMS
I.M. Distortion (SMPTE 4:1): 0.01% @ 30W
Signal to noise ratio: -100dB below rated output (A-weighted)
Input sensitivity: 700 millivolt for 30W RMS @ 8ohms
Power consumption: 1400W maximum @ 4ohms (full power) / 6.5W (standby)
AC Fuse: 10A AG (F10AL- 250)
Heat output: 2732 BTU/hr (full power)