Universal Remote Control MX-800 Universal Remote |
|
|
 |
Universal Remote Control- RF Frequency |
Take control of your entertainment system with the MX-800 Universal RF remote Control. The MX-800 gives you the ability to control up to 20 seperate components, all through a single television. This remote comes with easy-to-install, easy-to-program software that allows you to quickly design a remote-control program specific to your needs. |
|
|
|
|
|
|
The Ferrari of Hand-Held Remotes |
The IR/RF MX-800 uses the successful combination of LCD screen and hard button technology from the award-winning MX-700 Infrared remote control called the "Ferrari of Hand-Held Remotes" by the editors of RemoteCentral.com. The MX-800 broadcasts radio frequency (RF) signals as well as infrared (IR). Using the MRF-200 RF Base Station the MX-800 can automate infrared A/V components without pointing the remote at all, through walls, floors and cabinet doors, indoors or outdoors. RF Addressing Enables any MX-800 to
Control Up to 16 Equipment Locations in one house! |
How It Works |
The MX-800's Radio Frequency (RF) operation provides 50' - 100' range though walls and doors, indoors or outdoors. Self-adhesive "flashers" affix to the infrared sensors on the front panels of your components. The flashers relay commands to components out of sight of the MRF-200's front blaster. The flashers plug in to the MRF-200's rear flasher line outputs via their 10 foot cables. Six flashers are included with each MRF-200. Each MX-800 can be programmed to operate equipment placed throughout the house, by installing an MRF-200 base station at each location. In operation it's simple: when you select a device located in the home theater, the MX-800 talks to the MRF-200 in the home theater. This makes possible a dream come true! A macro may be programmed to turn off all of the TVs in the entire house with one touch. Simply install an additional at each TV location. |
RF Routing Allows For Control Over An Array Of Identical Components |
The MRF-200 enables your installation to control up to six identical TVs or other identical components (VCRs, CD players, etc.) by routing your commands only to the TV you select on your MX'800. The other identical TVs will not receive commands. In addition, the MX-800 can control up to 20 components. Each of the 20 components can be programmed with up to 4 pages of LCD screens. |
Easy to program; Widows Based Software but Mac Capable |
A custom installer can use the MX-800 system software to quickly design a remote control program to meet their exact needs in minutes. The programming package also offers the Programming Wizard to lead the first time programmer step by step through the customization process. The MX Editor software contains over 1,500 "code sets" of Brands/Models, including hard to find and specific discrete codes that allow for precise control of all system components. MX Editor also has the ability to learn new commands and Live Update the IR database over the internet, guaranteeing compatibility with any component you may add to your system in the future. MX Editor can be used on a Mac if the user has a Windows 98, ME, 2000 or XP emulator. |
Extensive Macro Programming |
The powerful memory of the MX-800 offers up to 912 potential macro buttons. Each of these macros can play back recorded sequences of commands that completely automate a complex system with one touch. A macro can record and play back up to 190 steps with time delays between steps when desired. For example: a single touch to the ON button could turn on the TV, the surround sound system, and the satellite receiver, then set the TV to the correct video input, the surround system to the right audio settings, and finish by selecting your favorite satellite tv channel. That's power. |
A Few More Perks |
The MX-800 allows the user to program up to 50 favorite channels and the LCD screen will display the favorite channels that are programmed. This allows you to access your favorite channel with one simple button press. The optimized layout of hard buttons enables you to naturally reach both 5-way thumbpad to navigate on-screen menus and the critical Transport, Channel and Volume buttons. You'll quickly discover that you prefer using the MX-800 to control all the special features of your system (especially personal video recorders, satellite receivers, DVD players, surround sound receivers and digital cable boxes). There will never be a reason to dig out old remotes. The bright backlight using the latest EL technology enables you to use both remote control units in a low light environment. The MX-800 system features a smart memory back-up system that will retain the programmed memory for up to ten years, even with dead batteries. The centrally located Joystick helps the user navigate through menus and guides with ease, a very convenient feature for DVD players, Satellite and Cable TV and Personal Video Recorders. The GemStone buttons have a look and feel that instantly appeals to the customer. Unlike standard rubber buttons, these GemStone buttons add a very distinguished look to the remote controls that will compliment any high-end system. |
More reasons to buy the Universal Remote Control MX-800 Universal Remote from Vanns.com |
Free Shipping!
No Sales Tax!
Vanns.com is a Fully Authorized Dealer (Learn More)
The Universal Remote Control MX-800 Universal Remote is Brand New
The Universal Remote Control MX-800 Universal Remote Ships in a Factory Sealed Box
|
|
|
|
Was: |
$399.77 |
Savings: |
$150.00 |
Shipping: |
Free |
Your Price |
$249.77 |
This item is only available in our retail stores. If you are a Montana customer click the link below to select your store. |
| Select Your Store |
|
|
We Also Suggest |
|
|
|
|
Universal Learning Remote |
|
|
|
|
|
|
|
|
|
Universal Learning Remote |
|
|
|
|
|
|
|
