Elan ZPOWER (Black/White)

ZPower Power Controller

750430814

The ZPOWER Controller is a critical hub for both home theater and distributed A/V systems, addressing such needs as surge protection, sequenced AC switching and multiple triggering options.

Critical Home Theater Hub

The ZPOWER Controller is a critical hub for both home theater and distributed A/V systems, addressing such needs as surge protection, sequenced AC switching and multiple triggering options. The ZPOWER Controller has eight earth-grounded outlets. Two current sensing outlets are always on. Four outlets turn on immediately with a trigger input. Two more turn on with a programmable delay.

Multiple Trigger Options

No other power manager has as many trigger options. The six switched outlets can be triggered by the AC current sense of the two "Always On" outlets, by a remote trigger input, from the ELAN SENSE sensor input, or by the front panel switch. Any combination of triggers can be selected so that multiple sources can initiate the turn-on sequence. The 12VDC triggered output and a relay contact closure make it easy to close drapes or lower screens. And the relay output is programmable, allowing home theater triggered events to close drapes, but system-triggered events to turn on sources without closing the drapes!

Protect Your Valued System

High-quality transient voltage protection is also included, with inductive AC line filtering, MOV Surge Protection, 15A Circuit Breaker, a 2-line telephone surge suppressor and 1GHz coax surge suppressor loop-through. Front Panel LEDs indicate status and fault monitoring of the AC line. The ZPOWER Controller provides an extended warranty against surge on specified ELAN equipment purchased with and connected directly to it.

Extended Warranty Program

In addition to our standard two-year warranty against manufacturer's defects, ELAN Home Systems will warranty select ELAN products against surge-related damage for a period of five years. The conditions of this extended warranty are detailed in the ZPOWER CONTrOLLER Operation Manual, and must be met in full for this warranty to apply.

Comparison Specifications

Control Outputs: +12VDC @ 100mA remote trigger output jack; Configurable dry relay contact

Additional Specifications

AC Outlets: 2 "Always On", 4 "Switched" when triggered, 2 "Delayed" with 4 time settings
Switching Capacity: 1500W total
Trigger Options: 3-24V AC/DC, 120VAC Current Sense, ELAN SENSE Input, Combination Sense
800 Joule, MOV surge protection; 270V clamping level
15dB line noise rejection; 15A circuit breaker
1GHz coax surge suppressor
Two telephone line surge suppressors with resettable fuses
Front Panel: Master On/Off switch, Trigger option and delay dip switches
LEDs: Power, Triggered, Delay, Ground OK, Phase OK
Power Requirements: 120VAC, 12W