Audioquest: Invest in the best
You're looking for a speaker cable with superior signal transmission and a smooth, clear sound. But you want a high-quality cable—and there's a plethora to choose from—so what could possibly make AudioQuest cables that much more superior? Well, let me tell you. These cables are babied. They're coddled. Each cable's hand is held from its conception in Bill Low's head until it is carefully swaddled in product packaging and shipped off to your home.
Get your recommended daily intake
AudioQuest recommends six to eleven servings of wholesome sound per day. And that shouldn't be hard considering AudioQuest's Long-Grain Copper (LGC) allows a smoother and clearer sound than cables using regular Oxygen-Free High-Conductivity (OFHC) copper. OFHC is a general metal industry specification regarding "loss," without any concern for distortion. LGC has fewer oxides within the conducting material, less impurities, less grain boundaries, and definitively better performance.
The constancy of superb solder
Just as cable technology relies on minimizing distortion, so does solder. Using the most appropriate flux and precise metallurgy, AudioQuest solder has been optimized to make a low-distortion connection. All solder, including silver, is a poor conductor. The difference you hear between solders is a result of connection quality. AudioQuest Solder does not have a high silver content because the more silver there is in solder, the more difficult it is to make a good connection. (Though quite the opposite is true when it comes to using silver conductors.)
Insure quality sound with proper insulation
Any solid material adjacent to a conductor is actually part of an imperfect circuit. Wire insulation, circuit board materials all absorb energy (loss). Some of this energy is stored and then released as distortion. The general cable industry ranks insulating materials by loss, with little regard for distortion. AudioQuest ranks materials by damage to an audio signal. The PVC used in the SubA has too much loss to be used in a quality video cable, but it has a very benign distortion profile through the audio range, keeping SubA's sound pleasant and natural.
Damage control—let's compare apples. . .
It's important to know that an audio or video signal cannot be improved upon—it's as good as it's going to get once it leaves your amp, DVD player, whatever component you're running. So why bother with a high-end cable? Simple: the signal can't be improved, but it can be damaged. Significantly. A lesser-quality cable leaves your signal wide-open to instabilities. A lesser-quality cable is constructed of bundled, twisted strands of conductive material—up to 200 to 2000 strands per bundle. And as the signal wants to travel the path of least resistance (down the outside of the bundle), all those twisted strands inhibit the signal. They draw the signal from the outside of the bundle to the inside, where it fights to get back to the outside again. What's the result? Distortion. Lost data. Poor sound quality.
. . .to oranges
AudioQuest, on the other hand, engineers their cables with the highest quality, perfectly gauged solid-core, copper and silver conductors. And each conductor strand is slowly and precisely loomed, not twisted, into the final cable bundle—and it's important to note that the maximum amount of strands AudioQuest has used in their longest cable, for flexibility requirements, is 32 (that's a few less than 200, and a lot less than 2000). Once they have constructed the conductor, AudioQuest wraps it in the dielectric (a fancy word for the insulating material) to keep the cable at peak performance levels at all times by absorbing as little energy as possible in order to avoid the reintroduction of energy (distortion) back into the conductor.
The bottom line
What AudioQuest is doing is engineering cables with conductors that have all the proper attributes, for decreased distortion. They've arranged the conductors so the signal travels down a straight path, for decreased distortion. They've wrapped the conductor metal in a non-conductive material, to decrease distortion. The result is an astonishingly pure, very stable signal. Starting to make sense? AudioQuest loathes distortion. You'll love AudioQuest.
Comparison Specifications
- Geometry: Symmetrical Coax
- Metal: Solid Long-Grain Copper
- Gauge: 22 AWG
- Dielectric: PVC
- Termination: RCA
- Shield: Foil / Mylar / Foil
- Connectors: Gold Plated
- Jacket: Black Stripe PVC
Dimensional Specifications
- Cable Length: 9' 10" (3M)
AudioQuest Sub A 3M Warranty Details
Limited five-year warranty
More reasons to buy the AudioQuest Sub A 3M from Vanns.com
- Free Shipping!
- No Sales Tax!
- Vanns.com is a Fully Authorized Dealer (Learn More)
- The AudioQuest Sub A 3M is Brand New
- The AudioQuest Sub A 3M Ships in a Factory Sealed Box
