On or inside?
Not all flat panels are created equally. While any modern flat panel will be a lot thinner than the tube TVs of yesteryear, newer models like the latest LEDs take the cake when it comes to slimming down. These new TVs can often acheive incredible depths less of less than an inch. Designed to complement today's ultra-thin TVs, OmniMount's LEDP75 presents you with a choice: Would you prefer your mount on the wall, or inside? Using OmniMount's patent-pending Dual-Mode Installation, this full-motion wall mount lets you choose whether to place the mount on the wall like a traditional TV mount, or in the wall for a super-thin 0.6" mounting profile. So, what do you think, on or inside?
Move it, move it
The LEDP75 is a full-motion, or cantilever, wall mount. This means that it's capable of moving side-to-side, extending up to more than a foot from the wall, and adjusting the TV's angle left, right, up, or down. With a fixed wall mount, your TV is where it is. With a tilt mount, you get up/down angle adjustment. But what if you put the TV up and decide you wish it was a little to the right? Sometimes, even if you were willing to move it right, the physical constraints of your wall won't let you. Or what if you don't always sit in the same spot? A full-motion mount like the LEDP75 lets you easily adjust for all those issues to bring you the perfect picture.
Compatibility
The LEDP75 is designed to work with most modern flat panel TVS with screen sizes between 23" and 60", weighing up to 75 lbs, and using VESA mounting patterns from 100x100 to 400x600.
What's in the box?
The LEDP75 includes: 1 mount, 1 in-wall trim, 1 on-wall trim, 4 adapters, 1 complete panel attachment hardware kit, 1 complete mount installation hardware kit, 1 installation template, and 1 instruction manual.
Be the first person to write a review for this item.
Comparison Specifications
- Dual-Mode Installation for low profile on-wall mounting or flush in-wall mounting
- Tilt, pan, and swivel with ArmGlide for perfect TV placement
- Unique arm design fully nests for flush profile
- Compatible with new LED, LCD, and Plasma TVs
- Engineered from extruded aluminum with brushed and anodized finish
- Delrin bushings for smooth movement at every joing
- Integrated cable management hides and routes wires
- On-wall bezel has knockouts for cable management with tabs to guide wires
- Includes adapters for VESA 100x100 to 400x600 patterns
- Lift n' Lock for quick, easy, secure installation
Additional Specifications
- Trim plate conceals mounting hardware
- Trim plate paintable to match any wall
- Installation template for simple, accurate mounting
- Eco-friendly product design and packaging
- Includes complete hardware kit
- Aircraft-grade materials
Manufacturer Specifications
- Fits most 23" to 60" flat panels
- Supports up to 75 lbs
- Tilt: up to ±10°
- Mounting profile: 11.06" in-wall; 12.71 on-wall
- Lateral shift: 11.35"
- Mounting: 16" double-stud in-wall; single- or double-stud on wall; solid wall
- Black finish
OmniMount LEDP75 Warranty Details
5-year limited manufacturer's warranty
