Why is this better than my other cable?
The Type 1 cable from AudioQuest certainly doesn't look like a typical speaker cable. In fact, at first glance, it looks more like an HDMI cable than speaker wire. But, this design makes it a better cable in actuality. Here's how: in a typical cable, multiple strands are coiled together to carry the signal. This causes interaction electrically and mechanically, causing irritation and one-note bass boom. In the Type 1 cables, solid conductors eliminate the harshness and confusion of strand interaction. Reason 2: typical speaker cables use "oxygen-free"copper, which is oxygen-reduced, but not selected for low distortion. Audioquest Type 1 uses long-grain copper, which has fewer impurities, fewer grain junctions, and lower distortion. Finally, in a standard cable, high-inductance geometry smears sound, reducing information transmitted, while in Type 1 cables, low-inductance geometry preserves time information to preserve dynamics and clarity. And as an added bonus, Spread Spectrum Technology uses multiple conductor sizes to greatly reduce the awareness of individual conductor character flaws. This all combines to form one great-sounding speaker cable.
Notes
This cable uses solid copper wires with PVC insulation. It is approximately 0.5" wide and under 0.25" thick. There are four wires, 2 positive, 2 negative in differing sizes. Type 1 cables are available in 30- or 50-ft. increments in either white or dark gray jacket color. These cables come unterminated, so spade or banana connectors must be purchased separately if needed. See accessories page for details.
AudioQuest Speaker Cables Type 1 - Big Impact (June 21, 2010)
| Ease of Use |
|
(5/5.0) |
|---|---|---|
| Value |
|
(5/5.0) |
| Performance |
|
(5/5.0) |
| Overall Rating |
|
(5/5.0) |
Reviewed By: Robert E. - Columbus, Ohio
The impact this speaker cable had on cleaning up the sound produced by the set of Mirage OMD-15s I have was very noticeable and far outweighed the price I paid for the cables. Good product that does not cost a lot of money. If you are using run of the mill cables, then spend a bit more for this product. You will be very happy with the returns you get, from such a small investment.
Comparison Specifications
- 50' unterminated speaker cable
- Solid conductors
- Long-grain copper
- Low-induction geometry
- Dark gray PVC jacket
- 2 x 16 AWG
- Uses CF-Spade or CF-BFA/Banana connectors
- Flat series
- Spread-spectrum technology
AudioQuest Type 1 50' Warranty Details
5-year manufacturer's warranty
