What sounded cool before now looks cool, too
Your new bookshelf or surround-sound speakers are cool. Doubly cool, in fact. First, bookshelf and surround-sound speakers enhance your home audio experience by giving you the ability to enjoy multi-channel audio now you can hear why your favorite album is, well, your favorite album. Second, these speakers just plain make your home audio system look as cool as it sounds. There is more to the story, however. Your bookshelf or surround-sound speakers aren't going to sound or look as cool as they can if they are sitting on the floor or windowsill behind your couch or recliner. The performance and appearance of your speakers can benefit greatly from the right speaker-mounting system. For medium-sized surround-sound speakers in medium-sized room installations, the 20.0 Wall Mount from OmniMount IS the right mounting system. Keep reading to learn why.
Tell us what it does!
Supporting speakers up to 20.0 pounds in weight, the 20.0 Wall Mount can be mounted on either a wall or a table surface, freeing-up your listening area and giving it a clean, modern look. Providing optimal versatility to meet your specific needs, your 20.0 Wall Mount can attach to either the back, top or bottom of your speaker. Thanks to its design, once securely mounted, the 20.0 Wall Mount gives you a variety of positioning options, including a 360° base rotation, 180° pan rotation and a +/-30° tilt. How? The polymer ball at the base of the stainless-steel mounting rod fits snugly within the wall-mounted bracket, and a small threaded shaft connects the ball to the speaker. The ball can then be rotated within the bracket so the connected speaker can be moved to the desired position to maximize the audio distribution.
Fire up the grill, fire up the boat, fire up your tunes
Let's say you want to run a second audio zone out to the back yard or patio, but are concerned about finding the appropriate mounting solution for your new deck/concert hall. No problem, your new 20.0 Wall Mount from OmniMount is suitable for all-weather and marine use. Get those disks, propellers and that rotisserie chicken a'turnin'!
All the hardware is included You just need a couple of tools
Whoa, this is easy. All of the mounting hardware that you need to set your bookshelf or surround-sound speaker securely in place is included with the 20.0 Wall Mount. The only things you need to have are common items: A Phillips head screwdriver, an electric drill, a masonry hammer, a 7/16" or 11mm crescent wrench, and a 1/4" drill bit for drywall, a 5/16" masonry bit for cement wall applications or a 5/32" bit for wood. And hey, if you don't have one of these, just ask your neighbors to lend it to you they're going to want come over and hear your new sound system, anyway.
Omnimount 20.0 (August 15, 2012)
| Ease of Use |
|
(4/5.0) |
|---|---|---|
| Value |
|
(4/5.0) |
| Performance |
|
(4/5.0) |
| Overall Rating |
|
(4/5.0) |
Reviewed By: Joe C. - Suisun City, Ca
I purchased 4 of these mounts to mount my Energy RC10 speakers to be used as fronts and rears for my surround system. The speakers weigh 12 pounds each. The mounts were very easy to install, came with good instructions and a good supply of hardware. I found the allen wrench that was supplied with the mounts to be to short to tighten the speaker sufficiently. I used a 316 allen that fit an my ratchet with an extention. This gave me a longer reach and more torque to tighten the speaker in the bracket. Even with this method I find the mounts allow the speakers to sag or drop from the position I would prefer them to be in. I have tightened them to a point that should be sufficient to hold the speaker in place but they still seem to settle lower than I prefer. I will try again. Other then the supplied wrench being too short and a slight amount of dropping out of place I am very happy with the purchase. I am not sure how well they would do with a 20lb speaker since mine are listed as 12lbs each.
OmniMount 20.0 wall-mounts (March 16, 2011)
| Ease of Use |
|
(5/5.0) |
|---|---|---|
| Value |
|
(4/5.0) |
| Performance |
|
(5/5.0) |
| Overall Rating |
|
(5/5.0) |
Reviewed By: Peter L. - New York, NY
I used these brackets for my two Mirage OMD-5 satellites and they could not be any better! Very sturdy, very strong construction and does the job very well. Not bad on the eyes either. Great product for a good price. Comes with plenty of various supports to make it a bit easier with the different mounting options.
Wish I could use these mounts (January 02, 2011)
| Ease of Use |
|
(5/5.0) |
|---|---|---|
| Value |
|
(5/5.0) |
| Performance |
|
(1/5.0) |
| Overall Rating |
|
(4/5.0) |
Reviewed By: Ray M. - Glendora, CA
Purchased these mounts for my Klipsch Bookshelf speakers. My speakers have a i4 x 20 sleeve on back side of speaker and mounts I ordered have a 38 stud. Wont work but I sure wish they would have.
Great speaker mounts (February 12, 2010)
| Ease of Use |
|
(5/5.0) |
|---|---|---|
| Value |
|
(5/5.0) |
| Performance |
|
(5/5.0) |
| Overall Rating |
|
(5/5.0) |
Reviewed By: Jeffrey P. - Lowville, NY
I would just like to say for having small speakers these mounts are the way to go for wall mounting.
OmniMount Speakers 20.0 W Black (February 11, 2010)
| Ease of Use |
|
(5/5.0) |
|---|---|---|
| Value |
|
(5/5.0) |
| Performance |
|
(5/5.0) |
| Overall Rating |
|
(5/5.0) |
Reviewed By: Marshall P. - Tallula, IL
Item sent on time. Received personal phone call to confirm shipment of open box product. All around good service.
Comparison Specifications
- Single-speaker wall mount mount
- Maximum weight capacity: 20.0 lbs
- Maximum flexibility: 360° base rotation / 180° pan / +/- 30° tilt
- Made of stainless steel and aluminum / Threaded shaft
- Fits speakers with 3/8"-16 threaded inserts on back of speaker
- Ball and clamp design for greater mounting flexibility
- Suitable for all-weather and marine use
- MOUNTING HARDWARE INCLUDED:
- Two 1/4-20 x 1/2" Phillips-head screws
Additional Specifications
- Two #14 x 3/4" Phillips-head self-tapping screws
- Two #12 x 2" Phillips-head self-tapping screws
- Two plastic anchors
- One 5/32" hex wrench
- One 3/32 x 1-3/4" drill bit
- One extra jam nut
- REQUIRED TOOLS:
- Drill bits: 5/32" wood / 1/4" drywall / 5/16" carbide-tipped masonry
- Crescent or 9/16"/11mm open-end wrench
- Phillips screwdriver
Manufacturer Specifications
- Electric drill
- Masonry hammer
Dimensional Specifications
- Dimensions: 3.94" H x 3.62" W
- Weight: 0.7 lbs
OmniMount 20.0 W Black Warranty Details
Limited warranty
