Place it where you want it
So you've figured out where you want to place your subwoofer: the back of the room. The only problem is the wire. Now, you have several options here. You can spring for enough cable to run all the way around the room and over doorways. You could pull up the carpet and run the cable under it. You could get out the drill and go through the wall, floor, or ceiling. But those are both a huge hassle, not to mention awful costly. Maybe you'll just have to settle and place it closer to your receiver. Or, maybe not. Instead, consider the Subwoofer wireless kit from Sunfire. Here's how it works: You plug the SDSWiTX wireless transmitter into your A/V receiver. Then you connect the SDSWiRX wireless receiver to your subwoofer. For added bass and flatter frequency response, you can connect up to four wireless receivers and connected subwoofers to a single transmitter. Then as long as your subs are plugged into a power outlet, you're ready to go. The kit components work up to 49' from each other so you're free to place your subwoofer(s) just about anywhere in the room without any problems. While this kit was designed with Sunfire's Dynamic Series subwoofers in mind, it should work well with any subwoofers that have stereo RCA inputs. And you can rest assured that Sunfire products will always give you the highest quality for your money. This wireless subwoofer kit is a low-latency, high-accuracy design so you know you'll never miss a beat.
What's in the box?
This includes only the wireless transmitter. The wireless receiver shown in the picture must be purchased separately.
Sunfire Speakers Subwoofer wireless transmitter (December 26, 2011)
| Ease of Use |
|
(5/5.0) |
|---|---|---|
| Value |
|
(4/5.0) |
| Performance |
|
(5/5.0) |
| Overall Rating |
|
(5/5.0) |
Reviewed By: Arsenio C. - Groton, CT
Works Great!!
Additional Specifications
- Low latency design (only 22ms)
- 2.4GHz digital transmission
- Works with up to 4 wireless receivers and connected subwoofers
- Up to 15m (49') wireless range
- 16 bit resolution
- 48kHz sampling rate
- Specifically designed for Sunfire's DS series of subwoofers
- Requires separate SDSWiRX wireless receiver
Sunfire Subwoofer wireless transmitter Warranty Details
Limited manufacturer's warranty
